oil cooler
英 [ɔɪl ˈkuːlə(r)]
美 [ɔɪl ˈkuːlər]
n. 油冷却器
双语例句
- Simulation and Experiment of Flow Characteristic for Engine Oil Cooler
发动机机油冷却器流量特性的试验与仿真 - Effect of different tubes on the heat transfer and flow resistance performance of oil cooler with coronal fin tubes supported by helical baffles was studied in this paper.
通过实验研究了不同结构参数的螺旋折流板冠形翅片管油冷器，获得了油冷器的传热与阻力性能曲线。 - Eddy current detection for new copper tubing should be carried out before the replacement of copper tubing of condenser and oil cooler in thermal power plant.
火力发电厂凝结器、冷油器铜管更换前要对新铜管进行涡流检测，根据多年的检测经验，介绍在火力发电厂铜管涡流检测中的一点经。 - Oil cooler for hydraulic circuit of engineering machinery, such as excavator, vibratile roller, car-lifter& drill rig.
用于挖掘机、振动式压路机、汽车起重机、钻井机等工程机械油压系统的油冷却器。 - High efficiency liquid cooling system for optimum engine operating temperature-includes compact liquid cooled oil cooler.
高效率的液冷却系统为引擎提供了最佳的工作温度&他甚至还包含了一个紧凑的机油冷却器。 - Always replace the O-rings for the oil cooler!
始终应更换机油冷却器的o形圈！ - Check oil cooler internal anti-corrosion ( zinc) coatings, the need to redo.
检查油冷却器内部的防腐（锌）涂层，必要重做。 - Weight and performance parameters refer to engine with flywheel, TC silencer, attached pumps, oil filters and lube oil cooler.
柴油机重量和性能参数取决于柴油机是否带飞轮、增压器消音器、机带泵、油滤器和滑油冷却器。 - Check bearings and hydraulic oil temperature, if necessary, cleaning oil cooler;
检查轴承油压和油温，必要时清洗油冷却器； - This thesis used an experimental method to test heat transfer performance and pressure drop of aviation oil cooler.
本文主要以实验方法对航空用油冷却器作热传与压降性能测试及分析。 - Check oil cooler surface, if necessary, be cleaned;
检查油冷却器表面，必要时予以清洗； - Component parts and work principle of YZ90 type engine oil cooler are introduced.
介绍了YZ90机油冷却器的组成，阐述了其工作原理。 - According to the reason for resulting overheat, the hydraulic oil cooler was changed to the first row and heat exchangers were optimized based on experimental analysis.
根据系统过热的原因，调整液压油散热器的位置，并由实验获取的数据对各散热器进行优化设计。 - Purchased land in Minami-Nasu, Tochigi, for filter and oil cooler production plant establishment.
购买土地在南那须，枥木，为过滤器和机油冷却器生产厂成立。 - Completed the Utsunomiya Plant with the cutting-edge machines provided, which resulted in establishing the hydraulic oil filter and oil cooler full-scale production system.
完成了宇都宫厂与尖端仪器所提供的，这就导致在建立液压油过滤器，油冷却器全规模生产体系。 - Install bracket for oil cooler from above.
从上面安装机油冷却器支架。 - Research and Development of Vehicle s Oil Cooler Static Pressure Test System; Study on Workshop Environment Blast Prevention
车用机油冷却器静压爆破试验系统的研究与开发生产车间环境防爆探索&以某公司镁打磨车间防静电设计为例 - The rear rack is square framework above which injector apparatus, cylinder, proportional pressure meter, oil cooler, electric engine and oil pump, etc, are equipped.
后机架为长方形框架，其上安装有注射装置、油箱、比例压力、流量油路块、油冷却器、电机和油泵等。 - Design of Automatically Assembling Configuration on a Kind of Automobile Engine Oil Cooler
一种汽车机油冷却器自动组片机构设计 - Position the oil cooler and tighten fastening screws.
放置机油冷却器并拧紧紧固螺钉。 - Auxiliary automatic transmission oil cooler
辅助自动变速箱机油冷却器 - Check the operating conditions of lubricating oil cooler fan.
检查滑油冷却器风扇的运转情况。 - Fuel cooled oil cooler
燃油冷却滑油冷却器 - Push the servo oil line onto the oil cooler and mount the spring band clamp.
将伺服液压油管路推至机油冷却器上，然后安装弹簧卡箍。 - Make sure the four fastening screws on the oil cooler bracket are used correctly.
确保在机油冷却器支架上使用正确的四个紧固螺钉。 - Design of Charge Device on Automatic Assembly Line of Disc Oil Cooler
圆盘式机油冷却器自动装配线中上料装置的设计 - The involute oil/ water heat exchanger is a new type of oil cooler.
渐开线式油水热交换器是一种新颖的机油冷却器。 - The hydraulic fatigue performance test is the most fundamental trial in the development and production process of oil cooler.
在机油冷却器产品开发与生产过程中液压疲劳性能测试是最为基础的试验之一。 - The Flow Control and Study on Oil Cooler Heat Transfer Test System
机油冷却器传热性能测试系统中的流量控制研究 - At present, the gas tightness testing is a key process of quality testing for engine oil cooler.
目前对机油冷却器质量检测的关键工序就是对气密性进行检测。